Anti-Loss tools on printing (fall out) laserjet on media paperplate

Headache thinking about a printing master paperplate fall out?
Praise is there are solutions,

Optimo, Tools Anti loss (anti fall out) printing laserjet for all laserjet printers, solve the problem problem printing loss.

Suitable for almost all laserjet printers like HP 5000, 5100, 5200, 8150, 4V, Canon LBP 3500, and small printers are also suitable such as the HP 1020, 1000 and others.

This additional tool is designed to overcome the lost and fall out in results of laserjet printing  in the media paper plate..  May be you have this problem. Exit from the printer, the partial of toner loss (gripis : jawa), or look good but if wearing hand rubbed easily exfoliate (fall out), or nice and strong but after use on an offset machine has not until a ream of printing had fallen out some (gripis worked), there are certain parts that fall out or become less dense due to loss, so the result was not optimal as expected.

If you have a problem like this Alhamdulillah Allah has made it easier on us to handle it. We have found a practical and safe way is by adding anti-fall out equipment, suitable to applied in laser printers. We have been designing and producing tools that work to prevent loss in printing on thick media, so that the printing with a paper plate or other thick media can be sticky, strong and durable.

From our experiments, paper plate printed with the helping of our anti-loss tool is the result increased maturity of the toner, so be strong, tacky and not fall out. Can even be used to print up to 10 reams (with printing machine "toko") still did not fall out of toner.

This tool is suitable for use in all kinds of laserjet printers except some types of printers such as HP laserjet 8000 can not be assisted with this Optimo.

This tool can be used for the printer HP laserjet 5000, HP 5100, HP 5200, HP 4V, HP1005, HP 1006, Canon LBP 3500  and others laserjet printer brands including Canon, Samsung and Fuji Xerox.

This tool is suitable to solve the problem of prints is less mature or less strong, the prints can not be mature and easy to fall off or peel. However, this tool is not suitable for other printer problems such as problems "film heater" that are torn or perforated.

Here are two comparison images between the printed before the printer was given additional tools and after being given additional tools.

Before adding tools  :




After adding tools :



The device output (before adding anti-loss tool) polished by hand, the results fall out after being given a anti-loss tool  did not fall again, strong, resistant adhesive for offset printing up to 10 reams or more.

Even for the use of toner remanufacture, is still good and not fall out. This anti-loss tool is safe and not damage the printer. The printer still works as usual. What changed was the print media, become more ready to be used so that the device output to be getting better.

This tool is simple but very powerful. Shown to overcome the loss of prints / less matur properly. Even for can use with remanufactured toner, and do not fall out again.

Now print paperplate not have to use original toners, toner refills or remanufactured toner any use oke. If you buy an original toner with price $200 is now able to use remanufacture toner or refilled toner just need cost $18, - the results remain GOOD. Tremendous savings.

100% money back guarantee.

If you have purchased  Anti-Loss Equipment OPTIMO then the tool can not work properly. And You are not satisfied.  So your money will be returned 100%. Or we replace the new equipment. Provided that:
1.  You send Anti-loss tool OPIMO back to us in one piece has never been dismantled.
2.  You pay shipping costs. Sorry that we replace only the cost of purchasing the appliance not  shipping costs.  Thanks. This we do because we really will refund your money or replace them with new tools.

The price of this equipment is not expensive only US$ 50,- (fifty US dollars) It is very cheap to produce extraordinary results and tremendous savings. Once you transfer the money, we'll send you
1. complete tool
2. use and installation instructions.
3. explanation of how it works.


Reservations can be directly to me Mr. Didit Sofyan Muafif, please short message to
my phone number    +6285227357992 .

Payment can be via WESTERN UNION  on behalf of

"Didit Sofyan Muafif"
Address : Krapyak Kulon no 233 Kelurahan Panggungharjo, Sewon, Bantul, Yogyakarta

INDONESIA Zip Code : 55188
or through our account on

Bank Syariah Mandiri Katamso Yogyakarta IndonesiaNo. 1547017909.

After you send the money, please to confirm / notify me via SMS to my number +6285227357992 .
After we check and remittance into account, God willing, Anti loss tools and accessories OPTIMO immediately sent to your address.

You can also get cheap prices with resellers price that sell these products to join your friends who need the tools.  The reseller price only US$ 40,- (forty dollars). You may sell back at a price equal to us or increase prices are also not a problem. The advantage of 100% for you. The requirement is the purchase of the first with the normal price (US$ 50,-) and my next purchase will automatically calculate the price of a reseller (US$ 40,-).

To smooth relations with us, please directly sms to our numbers +6285227357992 and/or send email me in tonerpilihan@gmail.com.

Comments

Popular Posts